● 產  品  用  途  ：PRODUCT USES

該機器采用全新設計理念改變了傳統磨膠輥機的繁鎖操作方法，能使膠輥磨礪更加方便快捷、磨削******光潔。本機采用全自  動工作流程， PLC 全程控制，砂輪定量自動修整、皮輥大小自動檢測、膠輥表面粗糙度自行設置，使皮輥達到******工作狀  態，給紡紗帶來更高品質。在皮輥磨削模式方面，有指定直徑磨削、不同直徑磨削和皮輥?zhàn)詣?dòng)分揀三種模式可自行設定，這

樣能使皮輥使用周期更長，節約使用成本、提高工廠效益。

The machine adopts a new design concept to change the traditional roller grinding machine complex locking operation method,can make the roller sharpening more convenient and fast,grinding precision and clean.The machine adopts automatic workflow,PLC control,automatic quantitative grinding wheel dressing,roller size automatic detection,roller surface roughness self-setting,so that the roller to achieve the best working state,to bring higher quality spinning.In terms of roller grinding mode,there are three modes of designated diameter grinding,different diameter grinding and roller automatic sorting,which can be set by themselves,which can make the roller service cycle longer,save the use cost and improve the factory efficiency.

● 性  能  特  征  ：CHARACTERISTICS

磨削膠輥表面的粗糙度有粗、中、細三個標準，根據不同要求自行選擇，自動修整砂輪和手動修整砂輪兩種方法，自動修整  砂輪間隔時間及砂輪吹氣清理間隔時間可自行設定，真正達到連續高效的自動化生產和穩定而******的磨削精度，是膠輥磨礪  設備的******選擇。

Grinding roller surface roughness has coarse,medium and fine three standards,according to different requirements,automatic dressing grinding wheel and manual dressing grinding wheel two methods,automatic dressing grinding wheel interval time and grinding wheel blowing cleaning interval time can be set by itself,truly achieve continuous and efficient automatic production and stable and accurate grinding precision,is the best choice for roller grinding equipment.

● 主要技術參數：MAIN TECHNICAL PARAMETERS

1、 自動檢測，全程電腦操控

2、 磨削精度高，大小頭小于0.02mm

3、 磨削膠輥表面粗糙度值******可達Ra0.4um

4、 每小時磨削膠輥?zhàn)疃嗫蛇_(dá)280套

5、 砂輪自動修磨、自動清理

6、 料架容量：120套(430mm)

7、 額定功率：5kw

8、 機器重量：1000k g

9、 機器尺寸：2.5mx0.8mx1.6m

1,automatic detection,full computer control

2,high grinding accuracy,the size of the head is less than 0.02mm

3,grinding roller surface roughness value can reach the lowest Ra0.4um

4,grinding roller per hour up to 280 sets

5,grinding wheel automatic grinding,automatic cleaning

6,material rack capacity:120 sets (430mm)

7,rated power :5kw

8,machine weight :1000k g

9.Machine size:2.5mx0.8mx1.6m