產品用途：PRODUCTUSES

FU282B型金屬針布磨刷輥廣泛適用于國產及進口梳棉機磨礪及磨刷、針布之用，具有工效高、質量好、操作簡單、勞動強度低等特點。

FU282B type metal needle cloth brush roller is widely used in domestic and imported card grinding and grinding brush,needle cloth,with high efficiency,good quality,simple operation,low labor intensity characteristics.

性能特征：CHARACTERISTICS

1、 采用金剛砂輪，達到針尖輕磨、鋒利和平直度的修整

2、 配置二套不同密度的杜邦磨絲的刷輥，清潔齒側、齒底的銹蝕和棉粘膠。

3、 配置低壓直流調速系統，提高移動器具使用的安全性

1,the use of emery wheel,to achieve the needle tip of light grinding,sharp and straight trim

2,configure two sets of different density of Dupont grinding brush roller,clean the tooth side,tooth bottom rust and viscose.

3,the configuration of low-voltage DC speed control system,improve the safety of the use of mobile appliances

主要技術參數：MAIN TECHNICAL PARAMETERS

1、 電源：?jiǎn)蜗?20V/DC48V,   電機功率：500w

2、 磨輥轉速：0-1200rpm/mi   n可 調

3、 磨、刷輪移動速度：0~1000mm/min    (隨磨輥轉速變化)

4、 磨礪寬度：1080mm

5、 砂輪直徑×寬度：160x70mm

6、 刷輥1直徑×寬度：180×70杜邦磨絲0.4m m

7、 刷輥2直徑×寬度：190×70杜邦磨絲0.6m

1,power supply:single-phase 220V/DC48V,motor power:500w

2,roller speed:0-1200rpm/mi n adjustable

3,grinding,brush wheel moving speed:0~1000mm/min(with the roller speed change)

4,sharpening width:1080mm

5,grinding wheel diameter x width:160x70mm

6,brush roller 1 diameter ×width:180×70 DuPont grinding wire 0.4mm

7,brush roller 2 diameter x width:190×70 DuPont grinding wire 0.6m